GEFRAN MX SERIES MELT PRESSURE TRANSMITTER

Introduction

The MX series of Gefran, are pressure transmitters for using in High temperature environment.The main characteristic of this series is the capability to read temperature of the media up to 400°C.The constructive principle is based on the hydraulic transmission of the pressure.
The fluid-filled system assures the temperature stability.The phisical measure is transformed in a electrical measure by means the strain-gauge technology.

Features

 Pressure ranges: 0-35 to 0-2000bar / 0-500 to0-30000psi
• Extensimetric measurement principle with Wheatstone bridge
• Precision: <±0.25% FSO (H); <±0.5% FSO (M)
• Calibration signal 80% FSO internally generated
• Completely interchangeable with all existing products
• Protection level: IP65 (6-pin connector)
• Standard threading 1/2-20UNF, M18x1.5, other versions on request
• Stainless steel diaphragm 15-5 PH with GTP+ coating
• For ranges below 100 bar-1500 psi: 17-7 PH corrugated stainless steel diaphragm with GTP+ coating
• Other diaphragm types available on request